Instructions / Assembly

7
2
2. Have a second person hold the Upright (4) near
the Frame (1).
See the inset drawing. Connect the Upper
Pulse Wire (99) to the Lower Pulse Wire (124),
connect the Upper Main Wire (79) to the Lower
Main Wire (123), connect the Upper Power Wire
(115) to the Lower Power Wire (122), and con-
nect the Upper TV Coaxial Cable (100) to the
Lower TV Coaxial Cable (121).
See the inset drawing. Locate the covers (A, B)
on the Lower TV Coaxial Cable (121) and on the
Upper TV Coaxial Cable (100). Slide the covers
together and push the small cover (A) into the
large cover (B).
Then, insert the excess wire into the Upright (4).
3
3. Tip: Avoid pinching the wires. Attach the
Upright (4) to the Frame (1) with four M8 x 20mm
Screws (93) and four M8 x 1mm Washers (92);
start all the Screws, and then tighten them.
4
1
93
92
92
Avoid pinching
the wires
121
124
115
99
79
100
123
122
1
4
93
B
A