Instructions / Assembly

8
4. Tip: Be careful not to drop a screw between
the Left and Right Front Shields (21, 22).
Attach the Front Shield Cap (19) to the Upright
(4) with two M5 x 12mm Screws (78); start both
Screws, and then tighten them.
Next, press the Front Shield Cover (20) onto the
Left and Right Front Shields (21, 22).
Remove the Screw Cap (73) from the Front
Shield Cover (20).
Attach the Front Shield Cover (20) to the Frame
(1) with three M5 x 12mm Screws (78); start all
the Screws, and then tighten them.
Then, press the Screw Cap (73) back into the
Front Shield Cover (20).
4
42
9
89
5
5. Slide the Accessory Tray Cover (42) and the
Small Accessory Tray (9) together around the
rectangular tube on the Handlebar (47).
Attach the Accessory Tray Cover (42) to the
Small Accessory Tray (9) with two M5 x 10mm
Screws (89) and two M5 x 30mm Screws (88);
do not tighten the Screws yet.
20
19
78
78
78
78
22
1
78
73
4
88
47
21