User's Manual

1320x-QE128EVB Reference Manual, Rev. 0.0
Freescale Semiconductor iii
About This Book
This manual describes Freescale’s MC1320x and MC9S08QE128 evaluation board (1320x-QE128EVB).
The 1320x-QE128EVB contains Freescale’s MC13202 QFN-32 package and MC9S08QE128 Daughter
card used in the DEMOQE128 Flexis
™
QE128 Demonstration Board. The MC13202 is a short range, low
power 2.4 GHz Industrial, Scientific, and Medical (ISM) band transceiver. The MC13202 contains a
complete 802.15.4 physical layer (PHY) modem designed for the IEEE
®
802.15.4 standard which
supports peer-to peer, star, and mesh networking. The MC9S08QE128 is a low cost, low power,
high-performance HCS08 Family of 8-bit microcontroller units. The MC9S08QE128 use the enhanced
HCS08 core with 128 Flash size and 64 pin LQFP package.
Audience
This manual is intended for system designers.
Organization
This document is organized into five chapters.
Chapter 1 Safety Information — This chapter highlights Federal Communications
Commission operating guidelines.
Chapter 2 MC1320x and QE128 EVB Module Overview and Description — This chapter
introduces MC1320x and QE128 EVB which is an IEEE, 802.15.4 compliant
evaluation board based on the Freescale MC1320x and QE128 EVB device.
Chapter 3 System Overview and Functional Block Descriptions — This section provides an
overview of the and system block diagrams.
Chapter 4 Interface Locations and Pinouts — This chapter provides a description of the
interface locations and pinout of the 1320x-QE128EVB circuit board.
Chapter 5 Schematic and Bill of Materials — This chapter provides the schematic and Bill
of Materials (BOM).
Revision History
The following table summarizes revisions to this document since the previous release (Rev 0.0).
Revision History
Location Revision
Entire Document First draft of this doc.