User's Manual

MC1322x Network Node Reference Manual, Rev. 1.1
Freescale Semiconductor iii
About This Book
This manual describes Freescale’s 1322x Network Node evaluation board. The 1322x Network Node
contains a Freescale third-generation, low power, 2.4 GHz radio frequency transceiver, with 32-bit ARM7
core based MCU, hardware acceleration for both the IEEE Standard 802.15.4 MAC and AES security, and
a full set of MCU peripherals into an 99-pin LGA Platform-in-Package (PiP).
Audience
This manual is intended for system designers.
Organization
This document is organized into 5 chapters.
Chapter 1 Safety Information — Highlights some of the FCC requirements.
Chapter 2 1322x Network Node Module Overview and Description — This chapter
introduces 1322x Network Node (NN) which is an IEEE, 802.15.4 compliant
evaluation board based on the Freescale MC1322x device.
Chapter 3 System Overview and Functional Block Descriptions — This section provides an
overview of the Network Node and block diagrams.
Chapter 4 Interface Locations and Pinouts — This chapter provides a description of the
interface locations and pinout of the 1322x Network Node circuit board.
Chapter 5 Schematic and Bill of Materials — This chapter provides the schematic, board
layout, and Bill of Materials (BOM).
Revision History
The following table summarizes revisions to this document since the previous release (Rev 1.0).
Revision History
Location Revision
Chapter 1 Updated FCC information.