User's Manual
Table Of Contents
- About This Book
- Chapter 1 Safety Information
- Chapter 2 1322x Network Node Module Overview and Description
- Chapter 3 System Overview and Functional Block Descriptions
- Chapter 4 Interface Locations and Pinouts
- 4.1 Overview
- 4.2 Power Management
- 4.3 RF Circuitry
- 4.4 USB Connector (“B” Receptacle)
- 4.5 LEDs, Switch, Buttons and Joystick
- 4.6 LCD Connector
- 4.7 Debug/Development Connectors
- 4.8 Audio Subsystem Connections
- 4.9 GPIO Connector
- 4.10 FLASH Memory Recovery Jumpers and Erase
- 4.11 ADC Voltage References
- 4.12 Jumper Selection
- Chapter 5 Schematic, Board Layout, and Bill of Material
1322x Network Node Reference Manual, Rev. 1.1
Freescale Semiconductor 2-1
Chapter 2
1322x Network Node Module Overview and Description
2.1 Introduction
The 1322x Network Node (NN) is an IEEE 802.15.4 compliant evaluation board based on the Freescale
MC1322x device. The heart of the 1322x Network Node is Freescale’s MC1322x 99-pin LGA
Platform-in-Package (PiP) solution that can be used for wireless applications ranging from simple
proprietary point-to-point connectivity to complete ZigBee mesh networking. The MC1322x is designed
to provide a highly integrated, total solution, with premier processing capabilities and very low power
consumption.
The 1322x Network Node provides a platform to evaluate the MC1322x device, develop software and
applications, and demonstrate IEEE 802.15.4 and ZigBee networking capabilities. The Network Node
surrounds the core device with capabilities that provide a complete 802.15.4 radio, user interface,
debugging capabilities, connection to personal computers (PCs) and other devices, and portability.
Figure 2-1. 1322x Network Node