User's Manual

1322x-Sensor Node Reference Manual, Rev. 1.1
Freescale Semiconductor iii
About This Book
This manual describes Freescale’s 1322x Sensor Node evaluation board. The 1322x Sensor Node contains
Freescale’s third-generation MC1322x ZigBee platform which incorporates a complete, low power, 2.4
GHz radio frequency transceiver, 32-bit ARM7 core based MCU, hardware acceleration for both the IEEE
802.15.4 MAC and AES security, and a full set of MCU peripherals into a 99-pin LGA
Platform-in-Package (PiP).
Audience
This manual is intended for system designers.
Organization
This document is organized into 4 chapters.
Chapter 1 Safety Information — Highlights some of the FCC requirements.
Chapter 2 1322x Sensor Node Overview and Description — This chapter introduces 1322x
Sensor Node which is an IEEE, 802.15.4 compliant evaluation board based on the
Freescale MC1322x device.
Chapter 3 System Overview and Functional Block Descriptions — This section provides an
overview of the 1322x Sensor Node and system block diagrams.
Chapter 4 Interface Locations and Pinouts — This chapter provides a description of the
interface locations and pinout of the 1322x Sensor Node PCB.
Chapter 5 Schematic and Bill of Materials — This chapter provides the schematic, board
layout, and Bill of Materials (BOM).
Revision History
The following table summarizes revisions to this document since the previous release (Rev 1.0).
Revision History
Location Revision
Chapter 1 Updated FCC information.