User's Manual

1322x USB Dongle/Zniffer Overview
1322x-USB Reference Manual, Rev. 1.1
2-2 Freescale Semiconductor
2.2 Features
The 1322x USB Dongle/Zniffer provides the following features:
• Full IEEE 802.15.4 compliant wireless node; ZigBee capable with Freescale’s BeeStack software
stack
• Based on Freescale’s third-generation MC1322x ZigBee platform which incorporates a complete,
low power, 2.4 GHz radio frequency transceiver, 32-bit ARM7 core based MCU, hardware
acceleration for both the IEEE 802.15.4 MAC and AES security, and a full set of MCU peripherals
into a 99-pin LGA Platform-in-Package (PiP)
• MC1322x provides a highly integrated, low cost RF node
— On-board balun and antenna switch in package
— Typical -95 dBm sensitivity
— Typical 0 dBm output power, with max approximately +4 dBm
— Chip antenna
• Powered from USB interface with power-on green LED
• USB interface is full-speed compatible to the USB 2.0 and 1.1 specifications
• 20-pin site for standard JTAG debug/development interface connector
• Programmable user red LED for application purposes
• Reset switch
• Default 24 MHz crystal reference oscillator
2.3 Board Level Specifications
Table 2-1. 1322x USB Dongle/Zniffer Specifications
Parameter Units Notes/Conditions
MIN TYP MAX
General
Size (Enclosure: X, Y, Z) 60x24x12 mm
Size (PCB: X, Y) 55x15 mm
Layer build (PCB) 0.8 /
0.032
mm /
in
4-Layer
Dielectric material (PCB) FR4
Power
Voltage supply (USB) 4.4 5 5.25 V USB 2.0/1.1 standard specification
Current consumption 100 mA
Temperature
Operating temperature (see note) -30 +25 +85 °C
Storage temperature -30 +25 +85 °C