User's Manual

MC1323x Development Platform Overview and Description
1323x Development Hardware Reference Manual, Rev. 1.0
2-4 Freescale Semiconductor
— Onboard printed metal F-Antenna
• 32 MHz reference oscillator
• BDM serial MCU debug port
• Optional secondary 32.768 kHz crystal oscillator for accurate low power timing
• IR blaster
• 2 Mbit serial FLASH (uses SPI interface)
• Master reset switch
• Full power regulation and management
• 1323x-MRB board provides
— Required circuitry for MC13233 - crystals and RF circuitry including F-Antenna and optional
SMA connector
— Local power supply regulation
— Access to all GPIO
— Standalone or daughter card use models
— Serial FLASH, IR blaster, and BDM functions
• 1323x-RCM when used with 1323x-MRB provides
— USB to UART serial interface that is USB bus-powered and full-speed compatible to the USB
2.0 and 1.1 specifications
— Power supply source from two AA batteries, USB connector, or DC source
— 128x32 pixel graphic LCD
— 3-axis Accelerometer (uses IIC interface)
— Touch pad interface with interrupt capability (uses IIC interface)
— 6x6 Switch matrix
— Single tone buzzer
— 4 Blue LED indicators
• 1323x-REM when used with 1323x-MRB provides
— USB to UART serial interface that is USB bus-powered and full-speed compatible to the USB
2.0 and 1.1 specifications
— Power supply source from two AA batteries, USB connector, or DC source
— IR receiver
— 4x2 Switch matrix
— 4 Blue LED indicators