Freescale Semiconductor, Inc. ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Freescale Semiconductor, Inc... ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Bluetooth Headset User’s Guide 94001480400/D Rev. 1.5, 2002-09-02 For More Information On This Product, Go to: www.freescale.
Freescale Semiconductor, Inc. ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Freescale Semiconductor, Inc... ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Motorola reserves the right to make changes without further notice to any products herein.
Freescale Semiconductor, Inc. ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Contents Chapter 1 Introduction About This Document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Brief Description of Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Chapter 2 User Interface ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Freescale Semiconductor, Inc... 1.1 1.2 2.1 2.2 2.3 Buttons . . . . . . . . . .
Freescale Semiconductor, Inc. ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Freescale Semiconductor, Inc... ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 iv Headset For More Information On This Product, Preliminary Go to: www.freescale.
Freescale Semiconductor, Inc. ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Chapter 1 Introduction This document is the user’s guide accompanying the headset included with the Development Kit for the Bluetooth Platform Solution from Motorola. ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Freescale Semiconductor, Inc... 1.1 About This Document This introduction includes a brief description of the headset functionality. The following sections describe the user interface and system operational modes.
Introduction Freescale Semiconductor, Inc. ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Freescale Semiconductor, Inc... ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 1-2 Headset For More Information On This Product, Preliminary Go to: www.freescale.
Freescale Semiconductor, Inc. ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Chapter 2 User Interface ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Freescale Semiconductor, Inc... 2.1 Buttons The headset is equipped with a user interface including three buttons, referred to as VOL+, VOL-, and BT (Bluetooth). On the silk print of the Development Kit PCB, these buttons are designated +, -, and FUNC1 respectively. FUNC2 is never used.
Freescale Semiconductor, Inc. User Interface ARCHIVED BY LED FREESCALE SEMICONDUCTOR, INC. 2005 2.2 System States and Indications The following information relates to the figure below showing LED Flash Patterns and Coherence. The system state is indicated by either a green or a red LED. The red LED is used for indicating the battery state exclusively, whereas the green LED indicates all other system state information.
Freescale Semiconductor, Inc. System Events and Audio Indications ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Table 2-2. LED Indications (Continued) System States Green ON Time Outgoing connection 500 ms on, 500 ms off, 500 ms on Outgoing connection—batt. very low 500 ms on, 500 ms off, 500 ms on Connected 500 ms on Connected—batt.
User Interface Freescale Semiconductor, Inc. ARCHIVED SEMICONDUCTOR, INC. 2005 TableBY 2-3.FREESCALE Audio Indications (Continued) ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Freescale Semiconductor, Inc... Indication Name Indicated Event Frequency Duration Sound Pairing complete Successful pairing 1.
Freescale Semiconductor, Inc. ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Chapter 3 System Operational Modes Refer to Chapter 2, “User Interface” for an overview of the system MMI, including button action matrix and illustrations of audible and visual system indications. ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Freescale Semiconductor, Inc... This section describes typical operations that the user must carry out to operate the Development Kit headset.
Freescale Semiconductor, Inc. System Operational Modes BY FREESCALE SEMICONDUCTOR, INC. 2005 3.2 IncomingARCHIVED Connection The AG will usually establish a connection to the headset no later than when the AG, or the equipment to which it is connected, initiates an outgoing or detects an incoming “call”, where call might be a connection over the POTS2, a Voice-over-IP connection, or a mobile phone call.
Freescale Semiconductor, Inc. Call Active (Ongoing Audio Connection) ARCHIVED FREESCALE SEMICONDUCTOR, INC. 2005 It is up to the AG to decide the right BY behavior in this situation. Possible actions include dialing a pre-programmed number, requesting user input via a pop-up window, or prompting the user for spoken input for speech recognition processing.
Freescale Semiconductor, Inc. System Operational Modes ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 The headset supports entering Sniff Mode while maintaining an HV2 or HV3 link. This can be achieved in one of two ways: 1. The AG accepts the Sniff request send by the headset when the data link was established, without pulling the headset out of Sniff Mode when adding the SCO link. 2. The AG requests to put the headset in Sniff Mode when the SCO link has been established.
Freescale Semiconductor,Configuration Inc. Mode (Bonding) ARCHIVED FREESCALE SEMICONDUCTOR, INC.up 2005 If the link is lost, the user is notified BY by an audio indication. The headset then cleans all internal connection variables, and returns to the connection scan (idle) state, as if it had just been powered up. Thus, it will be ready for any reconnect attempt from the AG.
Freescale Semiconductor, Inc. System Operational Modes ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 Freescale Semiconductor, Inc... ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 3-6 Headset For More Information On This Product, Preliminary Go to: www.freescale.
