Integrated Microcontroller Reference Manual

Debug Module
MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 28-43
Table 28-25. PST/DDATA Specification for User-Mode Instructions
Instruction Operand Syntax PST/DDATA
add.l <ea>y,Dx PST = 0x1, {PST = 0xB, DD = source operand}
add.l Dy,<ea>x PST = 0x1, {PST = 0xB, DD = source}, {PST = 0xB, DD = destination}
adda.l <ea>y,Ax PST = 0x1, {PST = 0xB, DD = source operand}
addi.l #<data>,Dx PST = 0x1
addq.l #<data>,<ea>x PST = 0x1, {PST = 0xB, DD = source}, {PST = 0xB, DD = destination}
addx.l Dy,Dx PST = 0x1
and.l <ea>y,Dx PST = 0x1, {PST = 0xB, DD = source operand}
and.l Dy,<ea>x PST = 0x1, {PST = 0xB, DD = source}, {PST = 0xB, DD = destination}
andi.l #<data>,Dx PST = 0x1
asl.l {Dy,#<data>},Dx PST = 0x1
asr.l {Dy,#<data>},Dx PST = 0x1
bcc.{b,w} if taken, then PST = 0x5, else PST = 0x1
bchg.{b,l} #<data>,<ea>x PST = 0x1, {PST = 0x8, DD = source}, {PST = 0x8, DD = destination}
bchg.{b,l} Dy,<ea>x PST = 0x1, {PST = 0x8, DD = source}, {PST = 0x8, DD = destination}
bclr.{b,l} #<data>,<ea>x PST = 0x1, {PST = 0x8, DD = source}, {PST = 0x8, DD = destination}
bclr.{b,l} Dy,<ea>x PST = 0x1, {PST = 0x8, DD = source}, {PST = 0x8, DD = destination}
bitrev.l Dx PST = 0x1
bra.{b,w} PST = 0x5
bset.{b,l} #<data>,<ea>x PST = 0x1, {PST = 0x8, DD = source}, {PST = 0x8, DD = destination}
bset.{b,l} Dy,<ea>x PST = 0x1, {PST = 0x8, DD = source}, {PST = 0x8, DD = destination}
bsr.{b,w} PST = 0x5, {PST = 0xB, DD = destination operand}
btst.{b,l} #<data>,<ea>x PST = 0x1, {PST = 0x8, DD = source operand}
btst.{b,l} Dy,<ea>x PST = 0x1, {PST = 0x8, DD = source operand}
byterev.l Dx PST = 0x1
clr.b <ea>x PST = 0x1, {PST = 0x8, DD = destination operand}
clr.l <ea>x PST = 0x1, {PST = 0xB, DD = destination operand}
clr.w <ea>x PST = 0x1, {PST = 0x9, DD = destination operand}
cmp.l <ea>y,Dx PST = 0x1, {PST = 0xB, DD = source operand}
cmpa.l <ea>y,Ax PST = 0x1, {PST = 0xB, DD = source operand}
cmpi.l #<data>,Dx PST = 0x1
divs.l <ea>y,Dx PST = 0x1, {PST = 0xB, DD = source operand}
divs.w <ea>y,Dx PST = 0x1, {PST = 0x9, DD = source operand}
divu.l <ea>y,Dx PST = 0x1, {PST = 0xB, DD = source operand}