User's Manual

MC33696MODxxx Quick Start Guide
Laurent GAUTHIER-TSPG-MCD-ARC Page 3
 At the end: “Receive Mode Active” indicates that the kit is waiting for data.
If an RF signal is transmitted using another kit or an RF generator properly configured (433,92MHz, Pulse
modulation at 4800bps), then the screen will be filled with received data:
3.2 Configuration in Transmit mode
 With the mouse, click on “Transfer/Send text file”
 Select the xxx.txt Script file corresponding to the wanted configuration
 For exemple :“TX OOK 433.92MHz Square 4800bps.txt” will configure the kit in Transmit mode at
433.92MHz to send a modulated signal at 4800bps.