User's Manual

Build the Platform
Build a Development Platform: Assemble 3 Boards
18
i.MX31 3-Stack Development Kit Quick Start Guide
Connect Personality Board to Debug
Board
The Personality board connects to the Debug board using a 500-pin connector. The
connector is keyed to avoid misconnection, so there is only one way to connect these
boards. Connect the Personality board to the Debug board. See Figure 3.2
.
Figure 3.2 Install Personality Board onto Debug Board
Personality
Board
Debug
Board
Align boards
Personality
Board
Debug
Board
1
2
Connect boards
Personality
Board
Debug
Board
3StackQS_Linuxbeta.book Page 18 Wednesday, January 16, 2008 1:58 PM