User's Manual

Using the Linux Demo Image
Downloading Multimedia to the 3-Stack Board
26
i.MX31 3-Stack Development Kit Quick Start Guide
Downloading Multimedia to the 3-Stack
Board
Downloading the multimedia content to the 3-Stack board requires the following items:
• An SD card -After the SD card is plugged in, you may load the multimedia files
from a PC if the USB Mass Storage Application is launched.
• (Optional) the USBS Mass Storage Application
• A serial connection between the board and the PC (HyperTerminal software can be
used). Figure 4-1 shows the configuration for HyperTerminal software. After
communication is established, you can view the Linux directories using standard
Linux commands. Figure 4-2 illustrates the resulting display on the HyperTerminal.
Figure 4.1 Configuration for HyperTerminal
3StackQS_Linuxbeta.book Page 26 Wednesday, January 16, 2008 1:58 PM