User's Manual

About the Boards
CPU Board
6
i.MX31 3-Stack Quick Start Guide for Linux
CPU Board
Figure 1.1 CPU Board
You use the J1 board-to-board connector (500 pins) to connect the CPU board to either of
the other two boards:
• Connect the CPU board to a Personality board, for running demos (no Debug board
is needed).
• Connect the CPU board to a Debug board, (and connect the Personality board to the
Debug board) for developing software. The Personality board plugs into the other
side of the Debug board.
Software • Sample Windows® embedded CE binary image
from Freescale
• Windows embedded CE BSP available from
Freescale
Application
Development Tools
• ATK software
• Platform Builder 5.0/6.0
• Visual Studio 2005
Table 1.2 3-Stack Platform Features
Item Description
J1 Board-to-Board Connector
CPU
Board
Top
Bottom
3StackQS_Linuxbeta.book Page 6 Wednesday, January 16, 2008 1:58 PM