User's Guide
Table Of Contents
- About This Book
- 1 Introduction
- 2 MPC837xE-RDS Board
- 2.1 Board-Level Functions
- 2.1.1 Reset and Reset Configurations
- 2.1.2 External Interrupts
- 2.1.3 Clock Distribution
- 2.1.4 DDR2 SDRAM Controller
- 2.1.5 Local Bus Controller
- 2.1.6 Flash Memory
- 2.1.7 I2C
- 2.1.8 SATA Controller
- 2.1.9 PCI Express Interface (PCI-E & Mini PCI-E)
- 2.1.10 10/100/1000 BaseT Interface
- 2.1.11 RS-232 Port
- 2.1.12 USB 2.0 Interface
- 2.1.13 PCI Subsystem
- 2.1.14 COP/JTAG Port
- 2.2 MPC837xE-RDS Assembly
- 2.3 Connectors
- 2.4 LEDs
- 2.5 MPC837xE-RDS Board Configuration
- 2.6 Specifications
- 2.7 Mechanical Data
- 2.1 Board-Level Functions
- 3 Board Bootup
- 4 MPC837xE-RDS Software
- 5 Unit Assembly
- MPC837xE-RDS
MPC837xE-RDS, Rev. 1.0
6 Freescale Semiconductor
Preliminary, Subject to Change without Notice
I
2
C Inter-Integrated Circuit (computer bus)
EEPROM Electrically Erasable Programmable Read-Only Memory
JTAG Joint Test Action Group
DHCP Dynamic Host Configuration Protocol
DNS Domain Name System
VLAN Virtual Local Area Networks
NAT Network Address Translation
PAT Port Address Translation
RIP Routing Information Protocol
VRRP Virtual Router Redundancy Protocol
PPPoE Point-to-Point Protocol over Ethernet
IGMP Internet Group Management Protocol
UPnP Universal Plug and Play (computer protocol)
SNMP Simple Network Management Protocol
QoS Quality of Service
IPsec Internet Protocol Security
PPTP Point-to-Point Tunneling Protocol
L2TP Layer 2 Tunneling Protocol
References
The following sources were referenced to produce this book:
• MPC8379E PowerQUICC™ II Pro Integrated Host Processor Family Reference Manual
(MPC8379ERM)
• MPC8379E PowerQUICC II Pro Integrated Host Processor Hardware Specifications
(MPC8379EEC
• Hardware and Layout Design Considerations for DDR Memory Interfaces (AN2582)