User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 13
Figure 3-5. Network Connections, Wireless
3. For wired connection, the following steps apply:
a. In the Local Area Connection Properties window > General tab, scroll down to Internet
Protocol (TCP/IP) (Figure 3-6) then double click it to open the Internet Protocol (TCP/IP)
Properties window (Figure 3-7).
Figure 3-6. Local Area Connection Properties
b. In the General tab (Figure 3-7), perform the following steps:
1.) Click Obtain an IP address automatically.