User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 17
3.4.2.1 Cable User (Static IP)
If you are receiving services from cable or other ISP assigning IP address automatically, select one of the
following (Figure 3-12), for which you can type the static IP address:
• LAN Configuration > Connection Type > Static IP
• WAN Configuration > Connection Type > Static IP
Figure 3-12. Network Setup—Static IP Address (LAN or WAN)
Options include the following:
• LAN DNS Servers (field and Add button). Also, for any LAN server IP shown (if existing), there is
a Remove link option.
• Remove Network LAN, which removes selection options for LAN Configuration.
• Remove Network WAN, which removes selection options for WAN Configuration.
• Add Network (field and Add Network button). Also, for any WAN server IP shown (if existing),
there is a Remove link option.