User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 22
• LAN Configuration > Connection Type > WWAN
• WAN Configuration > Connection Type > WWAN
Figure 3-17. Network Setup—WWAN (LAN or WAN)
After selecting LAN or WAN configuration, also select the secondary Connection Type (UMTS first,
UMTS only, GPRS only) from the drop-down list. Make other selections and fill other fields as
appropriate.
Options include the following:
• Remove Network LAN, which removes selection options for LAN Configuration.
• Remove Network WAN, which removes selection options for WANConfiguration.
• Add Network (field and Add Network button). Also, for any WAN server IP shown (if existing),
there is a Remove link option.