User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 25
WPA+WPA2 (PSK) from the dropdown menu and type the key in the WPA PSK field. Figure 3-20
shows example settings for WPA (PSK).
Figure 3-20. Wireless Encryption Setting—WPA-(PSK), RA0 Section Shown
3.4.2.8.3 WPA (RADIUS) Encryption
If your network uses a Remote Authentication Dial-in User Service (RADIUS) server for authentication,
select WPA (RADIUS) or WPA2 (RADIUS) or WPA+WPA2 (RADIUS) from the drop-down menu.
Type the IP address of your radius server in the RADIUS IP Address field, type the authentication port
number of your radius server in the RADIUS Port field, and type the key for your radius server in the
RADIUS Server Key field. Figure 3-21 shows example settings for WPA (RADIUS).