User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 31
Figure 3-28. Repeater Mode
Perform the following steps in the Wireless Configuration page Figure 3-29. (Navigation: Network >
Wireless, if necessary.)
1. From the Channel drop-down list, select a channel to match the other EWLAN channel. (The
channel setting must be the same for both EWLANs.)
2. From the Mode drop-down list, select Repeater.
3. In the SSID field, type the AP’s SSID.
4. In the WDS [n] BSSID fields, type the other WDS AP’s BSSIDs. (Format: xx:xx:xx:xx:xx:xx)
5. From the Encryption Type drop-down list, select the AP’s encryption.