User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 32
Figure 3-29. Repeater Mode Configuration, RA0 Section Shown
3.5.4 Configuring for AP Client Mode
An AP-Client can extend the wireless coverage of another wireless AP or router. However, AP-Client
does not require the remote device to have WDS function. It can work with almost any wireless device.
See Figure 3-30 for depiction.
Figure 3-30. AP Client Mode
Perform the following steps in the Wireless Configuration page Figure 3-31. (Navigation: Network >
Wireless, if necessary.)
1. From the Mode drop-down list, select AP Client.