User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 33
2. In the SSID field, type the SSID of the AP client unit.
3. From the Encryption Type drop-down list, select the Encryption Type of the AP client unit.
4. In the AP’s SSID field, type the AP’s SSID field of the AP client unit.
5. In the AP’s BSSID 335 field, type the AP’s BSSID (MAC address) field of the client unit.
6. From the AP’s Auth Mode drop-down list, select the AP’s Auth Mode of the AP client unit.
Figure 3-31. AP Client Mode Configuration
Figure 3-32 depicts an AP Client mode as follows: Two 8377 units are required. The SSID information
used at the local 8377 AP Client is the same SSID information as the one used for the remote MPC8377,
enabling them so that they can link together.