User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 34
Figure 3-32. AP Client Mode Layout
3.6 Selecting DynDNS Settings
Dynamic-DNS (Dynamic Domain Name System, also known as DDNS) allows a user to export a host
name to the Internet through a DDNS server provider. Each time the MPC8377EWLAN wireless router
connects to the Internet and gets an IP address from the ISP, this function updates your IP address to the
DDNS service provider automatically. Any user on the Internet can access it through a predefined name
registered in DDNS service provider.
Click DynDNS to enter the DynDNS Settings page (Figure 3-33), then perform the following steps:
1. Under the DynDNS section, click Enable for Dynamic DNS Update.
2. From the Service Type drop-down list, select dyndns.
3. Under the Account section, in the User Name text box type the user name.
4. In the Password text box, type the password.
5. Under the Host section, in the Host Name text box, type the host name.
Figure 3-33. DynDNS Settings