User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 39
Click SNMP. Figure 4-34 depicts the System > SNMP window, Configure the Simple Network
Management Protocol settings. You can use management software to read or write information from or to
the device.
Figure 4-4 SNMP Settings
Table 4-1 describes each SNMP setting options in detail.
Table 4-1 SNMP Settings
Options Description
SNMP Public Community Name It identifies a group of devices and management
systems that can read configure information of
system by SNMP “Get” commands.
SNMP Public Source
It identifies the IP address, hostname or network
mask for management systems that can read
information by this 'public' community.
SNMP Private Community Name It identifies a group of devices and management
systems that can modify configure information of
system by SNMP “Set” commands
SNMP Private Source It identifies the IP address, hostname or network
mask for management systems that can modify
information by this 'private' community
SNMP Trap Community Name
It identifies the community string to be used when
sending traps by SNMP "Trap" commands.
SNMP Trap To HostIp
It defines the IP address for management systems
that can receive trap package from this device..
SNMP Trap To Port
It identifies the Port number for management
systems that can receive trap package from this