User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 43
Figure 5-4. Reboot
Table 5-1 describes each of the section of Interfaces page.
Table 5-1 Interfaces
Option Description
WAN WAN stands for Wide Area Network and is usually
the upstream connection to the internet.
DNS Server It displays the DNS server details.
LOOPBACK
A loopback interface is a type of 'circuit less IP
address' or 'virtual IP' address, as the IP address is not
associated with any one particular interface (or
circuit) on the host or router. Any traffic sent by
computer program on the loopback network is
addressed to the same computer.
WLAN 1 WLAN stands for Wireless Local Area Network. It
displays WLAN 1 details.
RAW Information It displays the raw information. (Figure 5-5)