User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 50
Figure 6-1. VPN > IPSec page
6.1 IPSec
The VPN Router can create one or multiple tunnels (or secure channel) that each connect between two
endpoints, so that the transmitted data or information between these endpoints is secure.
Virtual Private Network (VPN) is a security measure that creates a secure connection between two remote
locations. Configure these settings so the Gateway will create VPN tunnels.
Click VPN > IPSec to open the IPSec page (Figure 6-1).
The table below explains each of the option present in IPSec page.
Function Description
Name Enter name of tunnel, The name should be unique.
Local Security Gateway Type Select IP only or IP + domain from the Local Security
Gateway Type drop-down list. Incase, you select IP
Only, then only the specific IP Address will be able to
access the tunnel.