User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 55
6.2 PPTP
Click VPN > PPTP to open the PPTP page (Figure 6-5).
Perform the following steps:
1. Enter the user name.
2. Enter the password.
3. Enter the IP Address.
4. Click Add to add the configuration
5. Click Save Changes to save the configuration data.
Figure 6-5 VPN > PPTP VPN User page
7 Managing Storage, Samba, and File Editing in NAS
This section explains managing storage and other related items in Network-Attached Storage (NAS):
Disk, RAID (Redundant Array of Independent Disks), Samba, File Editor. Click NAS (Figure 7-1), then
proceed with the respective sections.