User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 56
Figure 7-1. NAS
7.1 Disk Management
Click Disk. Figure 7-2 depicts the NAS > Disk Management window.
Figure 7-2. Disk Management
To add a new disk, click New. Figure 7-3 depicts the NAS > Disk Management > New window. Type in
fields or select from drop-down lists as appropriate.
Figure 7-3. Add New Disk
The Action Command drop-down list includes the following possible actions besides No Action:
Format, Mount, and Umount.
7.2 Format Disk
CAUTION
If you select Format, all data on the disk will be lost.
Perform the following steps, as depicted in Figure 7-4:
1. From the Disk devices drop-down list, select the device.