User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 57
2. From the Action Command drop-down list, select Format.
Figure 7-4. Format Disk
7.2.1 Mount Disk
Perform the following steps, as depicted in Figure 7-5.
1. In the Mount point field, type the address you want to mount. For example, /home.
2. From the Action Command drop-down list, select Mount.
Figure 7-5. Mount Disk
7.2.2 Unmount Disk
Perform the following steps, as depicted in Figure 7-6.
1. In the Mount point field, type the address where your disk is mounted.
2. From the Action Command drop-down list, select Umount.