User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 58
Figure 7-6. Unmount Disk
7.3 RAID Management
Click RAID. Figure 7-7 depicts the NAS > RAID Management window.
Figure 7-7. RAID Management
To add a new disk, click New. Figure 7-8 depicts the NAS > RAID Management > New window. Type
in fields or select from drop-down lists as appropriate. The (Table 7-1) below explains each of the option
present in RAID management window in detail.
Table 7-1 RAID Management
Option Description
Raid Name Enter the RAID name.
RAID devices These are all the RAID devices attached to the system.
RAID type These are all the RAID devices supported.
Members of this volume These are all the members of the volume. Uncheck to
remove.