User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 60
1. In the Raid Name text box, type the name.
2. From the Raid type drop-down list, select RAID 0.
3. Click Add Member. (You must have two disks on the 8377.)
4. From the Action Command drop-down list, select Create.
Figure 7-10. Create RAID0
7.3.2 Create RAID1
This procedure creates the software RAID1. Perform the following steps, as depicted in Figure 7-11:
1. In the Raid Name text box, type the name.
2. From the Raid type drop-down list, select RAID 1.
3. Click Add Member. (You must have two disks on the 8377.)
4. From the Action Command drop-down list, select Create.