User's Guide
Table Of Contents
- 1 Package Contents
- 2 Introduction to the Interface
- 3 Connecting and Configuring the MPC8377EWLAN Wireless Router
- 3.1 Connecting the MPC8377EWLAN Wireless Router (Wired Computing)
- 3.2 Connecting the MPC8377EWLAN Wireless Router (Wireless Computing)
- 3.3 Setting Up the IP Address
- 3.4 Configuring the MCP8377EWLAN Wireless Router
- 3.5 Changing the Operation Mode
- 3.6 Selecting DynDNS Settings
- 3.7 Firewalls
- 4 Selecting or Changing System Items
- 5 Status
- 6 VPN
- 7 Managing Storage, Samba, and File Editing in NAS
- 8 Intrusion Detection Systems
- 9 Intrusion Prevention Systems
- 10 Logout
MPC8377EWLAN Wireless Router SW User’s Guide 71
9.1 Configuration (IPS Configuration)
Click Configuration. Figure 9-2 shows IPS Configuration.
Figure 9-2. IPS Configuration
9.1.1 IPS Configuration
The Wireless Router support advanced Intrusion Prevention System (IPS) is an integral part of the self-
defending strategy. It allows you to stay current on the latest threats to identify, classify, and stop
malicious and damaging traffic in real-time.
Perform the following steps as depicted in Figure 9-2.
1. Enable/disable IPS Function.
2. Click Save Changes button to save the changes.
9.2 IPS P2P/IM (Peer to Peer, Instant Messaging)
Click P2P/IM. Block/unblock various categories of peer-to-peer, instant-messaging connections, and
remote logins. Click Submit in the appropriate categories. See Figure 9-3.