Reference Manual

USB-KW24D512 Development Platform Overview and Description
USB-KW2x Hardware Reference Manual, Rev. 0.1
Freescale Semiconductor 2-3
2.3 Software and Driver Considerations
Install the BeeKit Wireless Connectivity Toolkit package found under Software and Tools at the following
URL before proceeding to use the boards:
• www.freescale.com\zigbee
When users first connect a KW2x based platform to a PC, they may be prompted to install drivers.
Platform drivers can be found under the installation Beekit folder as denoted below. Once BeeKit is
installed, do not allow Windows to automatically search for and install the drivers. Instead, select manual
installation and steer Windows to the following directory:
• C:\Program Files\Freescale\Drivers
Follow the instructions as they appear on the screen to complete driver installation.
NOTE
If the BeeKit software package is installed in another drive or directory,
indicate the Drivers proper folder location where BeeKit was installed.
If BeeKit is not installed, consider the following:
• When prompted, download the appropriate Windows driver and follow the instructions to complete
the driver installation.
• The required drivers to be installed will depend on the reference design platform.
— The KW2x boards come imaged with MSD OpenSDA firmware for board to PC connectivity.
The target in pre-loaded with the SMAC Connectivity Test application.
— Use the OpenSDA USB port (J15) to connect via Virtual COM Port (VCP) using P&E’s
OpenSDA Windows driver (See the TWR-OSDAUG.pdf guide).
For additional information about our 2.4 GHz Kinetis family ZigBee™ platforms, refer to the following:
• www.freescale.com\KW2x
• TWR-OSDAUG - OpenSDA User’s Guide
• SMACDAUG - SMAC User’s Guide