User Manual

ZSTAR3 GUI
ZSTAR3 Reference Design Manual, Rev. 0.1
Freescale Semiconductor 7-63
Preliminary
Pr
e
l
i
m
i
n
a
ry
7.2.2 The ZStar3 GUI main controls
This panel is visible on all tabs of ZStar3 GUI application. It shows the most important controls and
information of ZStar demo.
Figure 7-5. The ZStar3 GUI main controls
The GUI main controls
1
:
1. USB Stick connection panel.
2. The ZStar resolution switch 8/16 bits.
3. Reset of the ZStar hardware.
4. USB data flow monitor.
5. Log file controls.
6. Information of count of total connected sensor boards and currently selected one.
7.2.2.1 USB Data Flow monitor
This is special window designed for Monitoring data rates of communication via USB interface
2
. Window
shows all baic information of current USB load and its draw graph of last 40 seconds.
Figure 7-6. USB Data Flow Monitor
1. Red numbers in picture marks individual controls described in list below.
2. Only user payload - ZStar data.
1
2
3
4
5
6