User Manual

ZSTAR3 GUI
ZSTAR3 Reference Design Manual, Rev. 0.1
Freescale Semiconductor 7-67
Preliminary
Pr
e
l
i
m
i
n
a
ry
7.2.5.1 Scope demo application
This demo application shows graphical outputs of measured and computed values from selected sensor
board.It can shows unchanged raw data received direct from sensors or computed values in g. This window
as well provides computed absolute value from all three axes. All computed values can be displayed as
filtered.
Figure 7-10. Scope window application
The Scope window application controls
1
:
1. Data source selection - Select which data will be dispalyed, RAW or REAL.
2. Raw data panel - in this panel you can select which axes will be displayed.
3. Real data panel - in this panel you can select which axes will be displayed.
4. Filtered real data panel - in this panel you can select which filtered axes will be displayed and order
of average filter.
1. Red numbers in picture marks individual controls described in list below.
1
2
3
4