User Manual

ZSTAR3 GUI
ZSTAR3 Reference Design Manual, Rev. 0.1
Freescale Semiconductor 7-77
Preliminary
Pr
e
l
i
m
i
n
a
ry
7.3.1 Update process (Manual start)
1. For manual start select Bootloader Com port
1
from Comport list and press Open button.
Figure 7-19. Update software procedure - step1
2. When the GUI show the a Information message box about Update procedure, click on OK button
to continue.
Figure 7-20. Update software procedure - step2
3. Now the GUI shows the Update window. On it it has to be selected right type of the currently
connected ZStar USB Stick.
Figure 7-21. Update software procedure - step3
1. Bootloader port is started by procedure described in Section 5.6.1, “Switch to Bootloader procedure.
Select right ComPort
Then Open this port
Select type of
the USB Stick