User's Manual Part 2

Bootloader
Wireless Sensing Triple Axis Reference design, Rev. 0.9
Freescale Semiconductor 51
5.5.2 Dualboot guidelines
NOTE: The USB stick already comes from factory with two dualboot-aware applications pre-programmed.
USB stick and AN2295 Bootloader software provide a way of having two different software (devices) in
one USB stick. In order to do this, two dualboot-aware
versions of the software needs to be consecutively
bootloaded onto the USB stick:
Follow the sequence of instructions in the 5.5.1 Bootloading procedure for two dualboot versions of
software:
1. First bootload accelerometer_v2_ZSTARJW32-new-DUALBOOT.S19.
After bootloading, ZSTAR Triaxial Demo (COM1) should appear in Device Manager.
2. Next, remove the USB stick again, press the button, re-insert the stick and bootload
HID_ZSTARJW32-DUALBOOT.S19 software in.
After bootloading, a new device (ZSTAR Triaxial Mouse) should appear:
The ‘tilt’ mouse will install automatically and also appear in the Device Manager: