User's Manual Part 2

ZSTAR Installation Procedure
Wireless Sensing Triple Axis Reference design, Rev. 0.9
Freescale Semiconductor 59
9. Launch the RD3152 software “RD3152MMA7260QSW.exe" and select the COM port number
which you may have assigned in Device Manager.
Figure 6-1
If no error message appears, the COM port is opened correctly and software communicates with the USB
stick.
10. Now lets go and check data from the ZSTAR Sensor Board.
Raw data, 2D/3D screen, or Scope work should be used for this purpose. While moving (turning, shaking)
with a ZSTAR Sensor Board, data from the separate axis should change accordingly.
The RD3152MMA7260QSW calibration screen can be used for sensor calibration (calibration data is
stored in the Sensor Board).