VILTA V 1.
welcome Please visit official website to download the latest User Manual Important Statement 1. VILTA contains two modes: Denoising and Performance Denoising is default mode, suitable for all scenarios. Be sure to select Denoising mode when you have high requirement on audio quality. The Performance is strengthen mode, which will greatly improve the stability of gimbal. The motor response is radical that will be accompanied with some noise.
Product Overview 1 11 2 4 6 7 3 5 8 9 10 11 12 13 14 15 16 01
17 18 19 17 20 21 22 23 01. Tilt Axis 12. Camera Frame 02. Roll Axis 13. Pan Axis Lock 03. Pan Axis 14.1/4 Screw Port 04. Power Switch 15. Function Button 05. Shutter Button 16. HERO3/3+/4 Frame 06. Status Indicator 17. Golden Finger Connector 07. Joystick 18. 1/4 Screw Port 08. Micro-USB Charging Port 19. Accessory Mounting Port 09. Dismantle Button 20. Handle Battery Indicator 10. Lanyard Hole 21. Micro-USB Charging Port 11. Camera Fixed Knob 22. Handle Battery 23.
User Manual 1 Installation 1 Unlock Gimbal 1) Slide the Pan Axis Lock down 2) Twist the Tilt Aixs and Roll Axis to unlock The Status Indicator will flash red if any axis is locked 2 Install Camera 1) Insert GoPro in the Camera Frame 2) Fasten the knob as indicated 1. Put Hero 3/3+/4 into frame before installing to the Camera Frame 2.
3 Handle Dismantle and Mantle Dismantle: Press handle Dismantle Button and push as stated to demount the handle Mantle: Release Dismantle Button and align the mount, slightly pushing forward the gimbal 1. After dismantling handle, double tap on Power Button of gimbal to switch Follow Mode 2.
2 Control 1 Joystick Joystick Virtual Joystick Y:61 Joystick 100% P:45 Operation Status Quick Settings Setting 1）Long press the Power Switch and control VILTA through joystick 2）Connect VILTA with APP and control through vitual joystick Tilt Pan 2 Manual Directly adjust the shooting direction by hand Manual Mode can be turned on/ off in App 05
3 Connect and Shoot 1 VILTA as Remote Control Power on the gimbal and camera, and operate camera with the following steps GoPro5 CONNECTIVITY Connect New Smart Remote GoPro 4 ON SETTING PAIR WI-FI RC GoPro 3/3+ WI-FI RC NEW When the Shutter Button lights off, connection is successful Shutter Button 1) Long press the Shutter Button for 2 seconds to shoot/stop shooting 2) Short press to take a picture For more detailed function: check【Advanced】—【Shutter Button】 06
2 Connect APP Download and install APP For iphone Please search FreeVision in APP Store to download and install For Andriod Scan the QR code below to download and install The Shooting Function Menu in the APP VIDEO Video Video+Photo Looping PHOTO Photo Night Burst Night lapse photo Time lapse video TIME LAPSE Time lapse photo 1）Via App，you can control the gimbal and camera 2）You can select the shooting mode in the Shooting Function Menu in the APP 07
4 Charging 1 VILTA Charging Micro-USB Charging Port Charge gimbal and handle seperately through micro-USB charging port 2 Battery Indicator 1) Charge gimbal when the Power Switch glints.The Status Indicator alternately glints in red,yellow and green lights when charging. The Status Indicator turns green when fully charged. 2) Short press on Function Button to check handle battery level via Handle Battery Indicator.
5 Advanced 1 Button Function & Status Indicator Specification Power Switch Shutter Button Status Indicator Button Long press for 2s Long press for 7.
2 Mode Function Button Control Function Button Single Tap Semi-Follow Tilt and Roll Axes are locked. mode Pan Axis smoothly moves with handle Double Tap Follow Mode Roll Axis is locked. Pan and Tilt Axes smoothly move with handle Quadruple Tap Lock Mode Tilt, Roll, and Pan Axes are locked.
6 Parameter 1 Specification Parameter: Dimensions Weight Supported Camera 2 94*41*258 mm(Folded) 430g(15.16 oz) GoPro Hero3/3+/4/5 Technical Parameter: ·Controllable Rotation Range Pan Axis: Tilt Axis: Roll Axis: 360° (Infinite Rotation) -45°～100° ±40° ·Mechanical Rotation Range Pan Axis: Tilt Axis: Roll Axis: 360° (Infinite Rotation) -90°to 135° -44°to 90° ·Maximum Control Speed: Adaptive Rotation Speed（±500 °/s) ·Accuracy Static Accuracy Tilt: 0.001° Pan: 0.002° Roll: 0.
3 Other Specification · · · · · · Operating Temperature: -10℃ - 50℃(14°-122°F) Wearable Gimbal Working Time: 1.2h Handheld Gimbal Working Time: 7h Handle Charging Time: 2.5 h (5V,2A) Gimbal Charging Time: 1.5 h (5V, 1A) WIFI Working Frequency 2.412-2.462 GHz Packing list 1. VILTA handheld gimbal 2. Charging cable 3. Portable bag 4. Lanyard 5. User manual 6. Hero 3/3+/4 frame WARNING 1. Do not expose to fire or high heat. 2. Drop and collision will break VILTA. Please caution. 3. Not water-proof.
www.freevisiontech.
