User's Manual

Spread Spectrum Wireless Data Transceiver User Manual
Preliminary GXM Manual Version 0.2 41
PRELIMINARY
Note: With firmware x.40 and above, the Subnet ID default is F,F. A Multipoint Master with an F,F
Subnet ID will behave the same as if the Subnet ID was set to 0,0. A Multipoint Slave with a
Subnet ID of F,F will not roam from one repeater or network to the next, it will only link to a
Master or Repeater that has either a Transmit Subnet of 0 or an F,F Subnet ID.
(D)
RADIO ID
Option (D) allows a transceiver to be designated with an arbitrary, user selectable, 4-digit number which
identifies the transceiver in diagnostics mode.
(E)
LOCAL MODE
Option (E) allows the user to access an FGR2 or IM series Multi-point slave with a local master. This
Master is not the network master. This feature is only available with firmware versions 2.64 (FGR) and
3.64 (IM) or newer firmware. Please see Application note #5457 Local Mode for more information.
(G)
RADIO NAME
Option (G) allows the user to set a unique 20 character Radio name.