Integration Guide
Table Of Contents
Table Of Contents
Preface vii
Chapter 1: Introduction 1
Additional Information 1
Chapter 2: Hardware and Pinouts 3
Embedded Radio Connector Pinouts 3
10-Pin Connector 3
14-Pin Connector 4
Connectors and Cables 6
About Antennas 6
Antenna Location 6
Approved Antennas for the 900 MHz MM2 Radio Family 7
Antenna Installation 7
Cable Loss and Transmit Power Settings 7
Shielding 8
Specifications 9
MM2-T Specifications 9
MM2-LV-T Specifications 10
MM2-MR-T, MM2-MR-R Specifications 12
Mechanical Drawings 14
MM2-LV-T, MM2-T Mechanical Drawing 14
MM2-MR-R, MM2-MR-T Mechanical Drawing 15
Chapter 3: Integration 17
Current Measurements 17
PCB Board Design Recommendations 19
TTL Signals and Timing 20
Chapter 4: Networks and Programming 21
Setting Up the Network 21
Programming Methods 21
Accessing the Setup Menu Using a Terminal Emulator 22
Using ToolSuite to Connect to and Program Transceivers 23
Settings to Note 24
Low Power Mode 24
Diagnostics 24
Chapter 5: Troubleshooting 27
LIM0001AA Rev B (DRAFT) v
Draft