User's Manual

Chapter 1: Introduction
l Key Features and Supported Protocols on page 18
l Requirements on page 19
l Accessories on page 20
l Product Variations on page 21
l Certified Antennas on page 23
Key Features and Supported Protocols
The WavePoint 10e provides an industrial networking solution for a license-exempt market and
includes these features and standard networking technology and protocols.
Wireless Operating Modes
Configurations for the WavePoint 10e include:
l Wireless mode: Access Point / Repeater / Client that can operate concurrently in the 900
MHz, 2.4GHz, and 5GHz bands.
l Router mode: Network Address Translation (NAT) / Router / Bridge
Both the wireless mode and the router mode (called the Device Mode in the
WavePoint™ GUI) can be configured.
For information about how WavePoint 10e fits into a network deployment, see Network
Deployment Scenarios on page 31.
Available Network Services
The networking services and protocols WavePoint 10e provides are:
l Configurable MTU and PMTU discovery
when set up as an access point.
l DHCP MAC filtering and MAC binding.
l DHCP server or client.
l Dynamic DNS clients.
l Multi-instance DHCP server on WLAN.
l Multiple LAN subnets.
l PPPoE, PPTP client
l RIPv1 and RIPv2.
l Static and dynamic IP addressing.
l Static and dynamic routing.
l TCP, UDP, and ICMP protocols.
l VLAN setup.
l VPN Tunneling and Transport.
Device Management
Each WavePoint 10e is configured and monitored through a web browser interface.
The management options are:
Page 18 of 171 LUM0063AA Rev 05/05/2014
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.