User's Manual

Table Of Contents
WavePoint 10e
Right-click >Edit menu
The Parent Selection Profile Configuration dialog opens.
Parent Selection Profile Configuration dialog
4. Click the Selection Method list box arrow and select an option.
In this procedure, accept the Auto default.
l Auto - Accept this default to allow the non-root device to locate the optimal route to
the root device.
Using Auto, the device can connect to any of the parents it sees in the network.
l Branch - Select this option to define the number of hops the non-root device is
required to use to locate the root device.
This option forces the non-root device to use a specific path.
LUM0063AA Rev 05/05/2014 Page 67 of 171
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.