Reference Manual
Table Of Contents
- Preface
- 1. Introduction
- 2. Basic Radio Programming and Setup
- 2.1. Setting the Radio's Role in the Network and the Network Type
- 2.2. Establishing Communication with Instrumentation and Computers
- 2.3. Establishing Communication with Other Radios in the Network
- 2.4. Designate the RF Transmission Characteristics
- 2.4.1. 900MHz Channel Select Parameters
- 2.4.2. 900MHz Frequency Key (Golden Setting)
- 2.4.3. 900MHz Frequency Zones
- 2.4.4. High Noise
- 2.4.5. 900MHz Hop Frequency Offset
- 2.4.6. 900MHz Hop Table Size
- 2.4.7. 900MHz Hop Table Version
- 2.4.8. Max Packet Size and Min Packet Size (Golden Setting)
- 2.4.9. MCU Speed
- 2.4.10. Remote LED
- 2.4.11. Retry Time Out
- 2.4.12. RF Data Rate (Golden Setting)
- 2.4.13. RTS to CTS
- 2.4.14. Slave Security
- 2.4.15. Transmit Power
- 2.4.16. Transmit Rate
- 3. Configuring Point-to-MultiPoint Networks
- 3.1. Point to MultiPoint Network Characteristics
- 3.2. Point-to-MultiPoint Network Quick Start
- 3.3. Point-to-MultiPoint Operation LEDs
- 3.4. Overlapping MultiPoint Networks
- 3.5. Establishing Communication with Other Radios in a MultiPoint Network
- 3.6. Routing Communications through the Network
- 3.7. Setting Other MultiPoint Parameters
- 3.7.1. 1 PPS Enable Delay
- 3.7.2. Diagnostics
- 3.7.3. DTR Connect
- 3.7.4. Local Mode
- 3.7.5. Master Packet Repeat
- 3.7.6. Master Packet Repeat in MultiPoint Networks with Repeaters
- 3.7.7. Max Slave Retry
- 3.7.8. Radio ID
- 3.7.9. Radio Name
- 3.7.10. Repeaters
- 3.7.11. Repeater Frequency
- 3.7.12. Retry Odds
- 3.7.13. Slave / Repeater
- 3.8. Conserving Power
- 3.9. Reading Diagnostics in Tool Suite
- 4. Configuring Point-to-Point Networks
- 5. Advanced Programming
- 6. Viewing Radio Statistics
- 7. Approved Antennas
- 8. FGR3 Wireless Data Radios Pinouts
- 9. Troubleshooting
- 10. FGR3 Release Notes
- Appendix A: FGR3 Technical Specifications
- Appendix B: FGR3 Board Level Mechanical Drawing
- Appendix C: 900MHz Factory Default Settings
- Appendix D: 900MHz Channel Frequency IDs
- Appendix E: FreeWave Legal Information
Appendix D: 900MHz Channel Frequency IDs
FGR3
User-Reference Manual
LUM0110AA Rev Jan-2019 Page 139 of 143 Copyright © 2019FreeWave
This document is subject to change without notice. This document is the property of FreeWave Technologies, Inc.
and contains proprietary information owned by FreeWave. This document cannot be reproduced in whole or in
part by any means without written permission from FreeWave Technologies, Inc.
900MHz Channel Frequency IDs
ID Frequency ID Frequency ID Frequency
16 905.9328 56 915.1488 96 924.3648
17 906.1632 57 915.3792 97 924.5952
18 906.3936 58 915.6096 98 924.8256
19 906.6240 59 915.8400 99 925.0560
20 906.8544 60 916.0704 100 925.2864
21 907.0848 61 916.3008 101 925.5168
22 907.3152 62 916.5312 102 925.7472
23 907.5456 63 916.7616 103 925.9776
24 907.7760 64 916.9920 104 926.2080
25 908.0064 65 917.2224 105 926.4384
26 908.2368 66 917.4528 106 926.6688
27 908.4672 67 917.6832 107 926.8992
28 908.6976 68 917.9136 108 927.1296
29 908.9280 69 918.1440 109 927.3600
30 909.1584 70 918.3744 110 927.5904
31 909.3888 71 918.6048 111 927.8208
32 909.6192 72 918.8352
33 909.8496 73 919.0656
34 910.0800 74 919.2960
35 910.3104 75 919.5264
36 910.5408 76 919.7568
37 910.7712 77 919.9872
38 911.0016 78 920.2176
39 911.2320 79 920.4480