Reference Manual

2. Basic Radio Programming and Setup
FGR3
User-Reference Manual
LUM0110AA Rev Jan-2019 Page 53 of 143 Copyright © 2019FreeWave
This document is subject to change without notice. This document is the property of FreeWave Technologies, Inc.
and contains proprietary information owned by FreeWave. This document cannot be reproduced in whole or in
part by any means without written permission from FreeWave Technologies, Inc.
900MHz Hop Table Version
Setting Description
Options l 902-928 MHz, full band
l 915-928 MHz
l 903.744-926.3232 MHz
l 916-920 MHz
l 921-928 MHz
l 902-911_919-928 MHz
l Uses 902-928 MHz with center frequencies of 911-919 MHz notched out.
l 902-915 MHz
Important!: If using a Hop Table Version setting of 915-928 MHz, 916-
920 MHz, or 921-928 MHz, do NOT set the Frequency Key parameter
setting to E (916-920 MHz).
Terminal Menu (3) Edit Radio TransmissionCharacteristics > (0) FreqKey > F > (0) Hop Table
Version
Description: Determines the section of the 900 MHz band the radio uses.
In the terminal interface, enter the number that corresponds to the frequency band:
Terminal
Interface
Number
Frequency Band
0 902-928 MHz, uses the full band
1 915-928 MHz
2 903.744-926.3232 MHz
3 916-920 MHz
4 921-928 MHz
5 902-911_919.928 MHz
Uses 902-928 MHz with center frequencies of 911-919 MHz
notched out.
6 902-915 MHz