User's Manual

2. WPV10-100™ Camera Installation and Setup
Page 22 of 32 LUM0078AA Rev Apr-2016
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
2.3 Access the WPV10-100™ Camera
1. On the computer connected to the WPV10-100™, open a web browser.
2. In the address bar of the browser, enter the default WPV10-100™ IP Address:
192.168.1.200.
Figure 10: Entered IP Address
3. Press <Enter>.
The Login window opens.
Figure 11: WPV10-100™ Login window
4. Enter the default Username and Password (admin for both) and click Login.
Note: When accessing the WPV10-100™ the first time, the WebCMS download window
opens.