User's Manual

2. WPV10-100™ Camera Installation and Setup
Page 26 of 32 LUM0078AA Rev Apr-2016
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Figure 18: WebCMSLive Setup message
12. Click OK to close the messages.
13. Open a web browser.
14. In the address bar of the browser, enter the default WPV10-100™ IP Address:
192.168.1.200.
Figure 19: Entered IP Address
15. Press <Enter>.
The Login window opens.
Figure 20: WPV10-100™ Login window
16. Enter the default Username and Password (admin for both) and click Login.
17. Press <Enter>.