User's Manual

7. Administration
Page 102 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
7.4. Define a Guest Network Security Mode
1. Connect to the WP201-100 Access Point (on page 19).
2. Access the WP201-100 (on page 24).
3. In the WP201-100 Access Panel, click Wireless.
The Wireless window opens.
Note: See the description of the Wireless window (on page 191) for detailed information about
the options in the window.
4. Scroll to the Guest Network Settings area.
Note: See the description of the Guest Network Settings area (on page 204) for detailed
information about the options in that area.
5. Click the Edit button to open the Wireless Edit dialog box - Guest Network (on page 220).
Figure 118: Wireless Edit dialog box for a Guest Network
6. Click the Security Mode list box arrow and select one of these options:
l WPA-PSK - This allows user authentication without enterprise network connection.
l WPA2-PSK - This allows user authentication without enterprise network connection.
l WPA-PSK Mixed - This allows user authentication without enterprise network
connection.
Note: This example image shows the options for the WPA-PSK Mixed Security Mode.
The options are the same for the WPA-PSK and WPA2-PSK Security Modes.
DRAFT