User's Manual

WavePro™ WP201 Access Point: User Manual
7.14. Spanning Tree Settings - Activate and Define
1. Connect to the WP201-100 Access Point (on page 19).
2. Access the WP201-100 (on page 24).
3. In the WP201-100 Access Panel, click Basic.
The Basic window opens.
Note: See the description of the Basic window (on page 152) for detailed information about
the options in the window.
Figure 145: Basic window - Spanning Tree Protocol (STP) Settings area
4. Scroll to the Spanning Tree Protocol (STP) Settings area (on page 156).
a. Select the Enable option button to activate the Spanning Tree feature in the WP201-
100.
b. In the Hello Time text box, enter the Bridge Hello Time in seconds.
c. In the Max Age text box, enter the number of seconds for the Bridge Max Age.
Important!: If another bridge in the Spanning Tree does NOT send a hello packet for a
long period of time, it is assumed to be inactive.
d. In the Forward Delay text box, enter the number of seconds for the Bridge Forward
Delay.
e. In the Priority text box, enter the bridge priority number.
A smaller number has a greater priority than a larger number.
5. Click Save to save the changes.
The Wireless window returns.
The Changes tab shows the accumulated number of pending changes ready to apply.
LUM0073AA Rev Feb-2017 Page 123 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT