User's Manual

Table Of Contents
WavePro™ WP201 Access Point: User Manual
9.5. Connections window
The Connections window is used to view information of devices connected to the WP201-100,
including:
l Connection list of clients associated to the WP201-100’s 2.4GHz / 5GHz bands.
l The MAC addresses and signal strength for each client.
Note: See Viewing WP201-100 Connection Information (on page 93).
Access and Window Description
In the WP201-100 Access Panel, click Connections.
Important!: The images are examples only. The visible Connections are dependent upon the
WP201-100 network.
l Connections window - Mesh (on page 160)
l Connections window - WDS Access Point (AP) (on page 161)
l Connections window - WDS Bridge (on page 162)
l Connections window - WDS Station (on page 164)
9.5.1. Connection window - Default
Figure 175: Connections window - Default
Note: This default example shows both bands (2.4GHz and 5GHz) set to Access Points with a client
connected on 2.4GHz.
LUM0073AA Rev Feb-2017 Page 158 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT